NewsRSS RSS

News

Improvement OmniStep 4000
Injection moulded pulley set for PU inlets
Fixation valve closing catch

Injection moulded pulley set for PU inlets

Inspired by the pulley set we have developed for our plastic injection moulded air inlet valve, we have expanded our program with a similar unit however now suitable for our complete range of central controlled air inlet valves in polyurethane. The unit offers a perfect guidance for the control cord in combination with an ideal support for the main cable or rod.
The unit is mounted to the wall as well as to the air inlet valves which secures the correct position of the unit. The unit can be used in its standard execution and position for cord guidance to the left as well as to the right. The pulleys inside the bracket are installed by means of pressed-in stainless steel shaft which guarantees a long life performance.
The pulley set can be used for normally opened air inlet valves. In that case the pulley set is mounted on the upper flange of the inlet. The pulley set can also be used for the normally closed air inlet valves. In that case the pulley set is mounted on the bottom flange of the inlet. The unit, produced out of virgin ABS, is projected in such a way, that it also leaves room for the installation of the valve closing catch.